Agrint 1.32m Manual Side-Shift Flail Mower A-LIBEC132
Out of stock
LIBEC flail mowers have a manual side shift frame and light hammer blades. Ideal for cutting paddock grasses. Also leaves a fine lawn finish if used regularly.
Hydraulic Side-Shift Upgrade available here.
Use code SERVICE PACK for 30% off LIBEC Service Pack when purchasing a mower
Out of stock
The LIBEC132 Agrint 1.32m Manual Side-Shift Flail Mower is perfect for cutting grass in paddocks. It leaves a fine lawn finish when used regularly. These flail mowers have a lightweight construction specifically designed for lower horse power sub-compact tractors. The narrower width models are ideal for cutting between trees in orchards and vineyards. This style of mower has hammer blades for pasture topping.
This mower is fitted with a manual side shift A-frame as standard for added manoeuvrability. It also provides better access to hard to reach areas, such as in orchards or vineyards, with 3 fixed positions, in the centre, to the right and to the left. The full distance of the offset is 28cm.
The machine has several hammer style blades mounted onto a cylindrical rotor. The multiple blade action then creates finer cuttings on areas of longer grass and weeds. It is also better suited to uneven ground types than conventional topper mowers. The mower is belt driven, the multiple drive belts give power to the blade rotor shaft.
The LIBEC132 Agrint 1.32m Manual Side-Shift Flail Mower benefits from an adjustable rear roller. This means it can be adjusted with the tractor top link arm to change the mower angle and cutting height. The rear roller also helps to avoid blade scalping on uneven areas.
This manual side-shift flail mower can be attached to the 3 point linkage of a range of small or compact tractors. It is quick and simple to fit and operate. This means it will save time and effort.
|Working Width (cm)||
|Tractor Range (HP)||
|Cutting Range (cm)||
|Number of Blades||
- Manual side shift A-frame for added manoeuvrability.
- Adjustable rear roller.
- Hammer flail blades for finer cutting.
- Built in gearbox overrun clutch.
- Twin belt with tensioner.