The WWC Winton 5 Inch Wood Chipper is a versatile machine, making the perfect addition to any smallholding. It will chip wood up to five inches in diameter.
The WWC 5″ is useful for clearing woodlands and smallholdings throughout the year. It will take branches with a few leaves. However, if the leaf to branch ratio is too high it will need to be followed with more woody material to clear the output. This wood chipper has a 360-degree output chute for precision control.
It is simple to operate with four cutting blades on the flywheel and one stationary bed blade. The flywheel and bed blades are reversible and can all be flipped over when worn. There is also adjustment on the bed blade from the outside of the unit to ensure that the bed and flywheel blades are always at the optimum position when working for clean chipping and to avoid clogging.
It also has a shear bolt PTO for enhanced safety.
The Winton 5 Inch Wood Chipper can be attached to the 3 point linkage of a range of small and also compact tractors.
It is quick and simple to fit and operate, but also low maintenance. This not only saves time and effort, but also money.
The B-FTB5C Fleming 5ft Compact Tipping Transport Box is perfect for moving a wide range of items such as logs or manure.
Detachable tail gate for easy loading and unloading. The flexibility and versatility makes this implement a must have piece of kit for any smallholding or estate.
This attachment is simple to use with a manual sprung tipping lever. Once unloaded the link box can be manually pushed back in to position.
The box also has a front scoop section for backing into loose materials when the rear panel is removed. This is handy for quick and easy loading of manure, muck, hay, gravel, sand or loose soil.
Perfect for moving logs in the autumn or winter and also hay in the summer months. Or load up with tools and equipment for jobs around the yard throughout the year.
The reinforced design benefits from both strength and reliability. The manual tipping lever requires very little maintenance and gives you full control.
The tipping transport box can be attached to the 3 point linkage of a range of small or compact tractors. The Fleming 5ft Compact Tipping Transport Box is simple to fit with the standard category 1 size hitch and linkage pins.
|Dimensions||135 × 84 × 155 cm|
|Working Width (cm)||
|Tractor Range (HP)||
|Lower Linkage Width (cm)||
|Chipper Feed Type||
Shear Bolt PTO Shaft
- 360-degree output chute for precision control
- Shear bolt PTO shaft for enhances safety
- Reversible cutting blades for increased longevity
- Low maintenance
- Direct drive blades
- 5″ maximum branch diameter